View C917U472JZVDDA7317_8750319.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 1 overview kemets 900 series encapsulated radial leaded ceramic disc capacitors are specifcally designed for interference- suppression ac line fltering applications. having interna - tionally recognized safety certifcations, these capacitors are well-suited for applications that require keeping poten - tially disruptive or damaging line transients and emi out of susceptible equipment. they are also an ideal solution in situations where there is a need to suppress line distur - bances at the source. safety certifed capacitors are classifed as either x and/or y capacitors. class x capacitors are primarily used in line-to- line (across-the-line) applications. in this application there is no danger of electric shock to humans should the capacitor fail, but could result in a risk of fre. the class y capacitor is primarily used in line-to-ground (line by-pass) applications. in this application, failure of the capacitor could lead to danger of electric shock. with a working voltage of 440 vac in line-to-line (class x) and 300 vac in line-to-ground (class y) applications, these safety capacitors meet the impulse test criteria outlined in iec standard 60384. meeting subclass x1 and y2 require - ments, these devices are certifed to withstand impulses up to 4 kv (x1) and 5 kv (y2) respectively. these encapsulated devices also meet the fame test requirements outlined in ul standard 94vC0. radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade) ordering information c9 7 1 u 472 m z w d a a 7317 ceramic series body diameter lead spacing 1,2,4 spec. capacitance code (pf) capacitance tolerance rated voltage dielectric/ 8qtev wmkr 0e srk 1,3,4 failure rate packaging (c-spec) c9 = ceramic 900 series 0 = 7.0 mm 1 = 8.0 mm 2 = 9.0 mm 3 = 10.0 mm 4 = 11.0 mm 6 = 13.0 mm 8 = 15.0 mm 7 = 7.5 mm 1 = 10.0 mm u = safety two signifcant digits and number of zeroes j = 5% k = 10% m = 20% z = x1 440 vac /y2 300 vac s = sl y = y5p w = y5u v = y5v d = disc a = straight b = vertical kink c = outside kink d = inside kink a = n/a see "packaging c-spec ordering options table" below 1 due to a high risk of arcing, "inside kink" lead confguration cannot be combined with the 5 mm lead spacing option. the "inside kink" option is only available on capacitors with lead spacing of 7.5 mm or greater. a potential for arcing may exist when combining the "inside kink" lead confguration with a 7.5mm lead spacing option, especially in high humidity environments and/or when exposure to voltages and transients may impact creepage and clearance requirements. 2 capacitor body diameter will limit available lead spacing and packaging options. see "dimensions" and "product ordering codes and ratings" sections of this document to determine availability. 3 "vertical kink", "outside kink" and "inside kink" lead confgurations cannot be combined with the bulk/20 mm lead length option (wl20). 20 mm lead length is only available on capacitors with straight leads (lead confguration ordering code "a"). for nonstandard lead length inquiries, please contact kemet. 4 bulk packaging lead length availability is dependent upon "lead confguration" and "lead spacing." see "dimensions" section of this document to verify availability of a specifc lead length option. for nonstandard lead length inquiries, please contact kemet. one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 2 packaging c-spec ordering options table packaging type lead length (mm) 2,3 packaging ordering code (c-spec) ammo pack 20.0+1.5/?1.0 (straight leads) 18.0+2.0/?0 (preformed leads 1 ) 7317 bulk bag 3.01.0 0 3.51.0 0 4.01.0 0 4.51.0 0 5.01.0 0 20.0 minimum 4 wl20 1 preformed (crimped) lead confgurations include vertical kink, outside kink and inside kink. see "lead confgurations" and "ordering information" sections of this document for further details. 2 "vertical kink", "outside kink" and "inside kink" lead confgurations cannot be combined with the bulk/20 mm lead length option (wl20). 20 mm lead length is only available on capacitors with straight leads (lead confguration ordering code "a"). for nonstandard lead length inquiries, please contact kemet. 3 for nonstandard lead length inquiries, please contact kemet. 4 lead length of 20.0 mm minimum only available for straight leads. benefts ? s afety standard recognized (iec 60384C14) ? r eliable operation up to 125c ? c lass x1/y2 ? 7 .5 mm and 10 mm lead spacing ? l ead (pb)-free and rohs compliant ? h alogen free ? c apacitance offerings ranging from 10 pf up to 10 nf ? a vailable capacitance tolerances of 5%, 10% and 20% ? h igh reliability ? p reformed (crimped) or straight lead confgurations ? n on-polar device, minimizing installation concerns ? e ncapsulation meets fammability standard ul 94vC0 applications typical applications include: ? l ine-to-line (class x) fltering ? l ine-to-ground (class y) fltering ? a ntenna coupling ? p rimary and secondary coupling (switching power supplies) ? l ine disturbances suppression (motors and motor controls, relays, switching power supplies, and inverters) radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 3 lead confgurations straight vertical kink outside kink inside kink 1 d t ll s f 3.0 maximum d t ll s f 4.0 maximum 3.0 maximum d t ll s f 5.0 maximum 3.0 maximum d t ll s f 5.0 maximum 3.0 maximum 1 due to a high risk of arcing, the "inside kink" lead confguration option cannot be combined with 5 mm lead spacing ("s" dimension above). the "inside kink" option is only available on devices with lead spacing of 7.5 mm or 10 mm. dimensions C millimeters lead confguration lead confguration ordering code 1 s lead spacing tolerance d t e ?f lead spacing 2 body diameter 2 body thickness lead meniscus lead diameter straight a 7.5 1.0 see table 1 - "product ordering codes and ratings" 3.0 maximum 0.550.1 10.0 1.0 vertical kink (preformed) b 7.5 1.0 10.0 1.0 outside kink (preformed) c 7.5 1.0 10.0 1.0 inside kink (preformed) d 7.5 1.0 10.0 1.0 1 lead confguration is identifed in the 13th character of the ordering code. see "lead confguration" and "ordering information" sections of this document for further details. body diameter of capacitor will limit available lead spacing and packaging options. see "product ordering codes and ratings" sections of this document for further details. radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 4 approval standard and certifcation no. safety standard standard no. subclass working voltage certifcate no. vde (enec) iec 60384C14 x1 440 vac 40036415 y2 300 vac ul can/csa ul 60384C14 and e60384C14 x1 440 vac e356389 y2 300 vac these devices are vde/enec and ul recognized for antenna coupling and ac line-to-line (class x) and line-to-ground (class y) applications per iec60384C14 and ul 60384C14. environmental compliance these devices are halogen free and rohs compliant. they meet all requirements set forth by both eu and china rohs directives. general specifcations/performance characteristics dielectric/temperature characteristic sl y5p y5u y5v operating temperature range: ?40c to +125c capacitance change with reference to +25c and 0 vdc applied (tcc): ?1,000 ~ +350 ppm/ oc 10% +20%/?55% ~ +30%/?80% dielectric withstanding voltage (7.5 mm and 10 mm lead spacing) 2,600 vac (605 seconds at 25oc) quality factor (q) 30 pf and above: 1,000 below 30 pf: 400 +(20xc)* see dissipation factor dissipation factor (tan) at +25oc 1 see quality factor 2.50% 2.50% 5.0% insulation resistance (ir) limit at +25c 10,000 m minimum (500 vdc applied for 605 seconds at 25c) *c = nominal capacitance 1 capacitance and dissipation factor (df) measured under the following conditions: s l: 1 mhz 100 khz and 1.0 0.2 vrms x 5p, y5u and y5v: 1 khz 50 hz and 1.0 0.2 vrms n ote: when measuring capacitance, it is important to ensure the set voltage level is held constant. the hp4284 and agilent e4980 have a feature known as automatic level control (alc). the alc feature should be switched to "on." radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 5 table 1 C product ordering codes and ratings (1) to properly complete ordering code, insert the one-digit numeric code to refect required lead spacing: (note that select capacitance values and packaging options may limit lead spacing availability. see table above to verify availability.) 7 = 7 .5 mm 1 = 1 0.0 mm (2) to properly complete ordering code, insert the one-digit character code to refect the required lead confguration: (see "lead confguration" section of this document, page 2, for further details.) a = s traight b = v ertical kink c = o utside kink d = i nside kink (3) to properly complete ordering code, enter the four-digit numeric or alphanumeric "packaging c-spec ordering code." see "dimensions" section of this document, page 2, for available options. dielectric/ temp. char. kemet part number capacitance capacitance tolerance dimensions (mm) lead spacing body diameter (maximum) body thickness (maximum) lead diameter bulk packaging ammo packaging sl c90(1)u100jzsd(2)a(3) 10 pf 5% 7.0 5.0 0.55 0.1 7.5 mm or 10 mm c90(1)u120jzsd(2)a(3) 12 pf c90(1)u150jzsd(2)a(3) 15 pf c90(1)u180jzsd(2)a(3) 18 pf c90(1)u200jzsd(2)a(3) 20 pf c90(1)u220jzsd(2)a(3) 22 pf c90(1)u240jzsd(2)a(3) 24 pf c90(1)u270jzsd(2)a(3) 27 pf c90(1)u300jzsd(2)a(3) 30 pf c90(1)u330jzsd(2)a(3) 33 pf c90(1)u360jzsd(2)a(3) 36 pf c90(1)u390jzsd(2)a(3) 39 pf c90(1)u470jzsd(2)a(3) 47 pf c90(1)u500jzsd(2)a(3) 50 pf c90(1)u510jzsd(2)a(3) 51 pf c91(1)u560jzsd(2)a(3) 56 pf 8.0 c91(1)u620jzsd(2)a(3) 62 pf c91(1)u680jzsd(2)a(3) 68 pf c91(1)u750jzsd(2)a(3) 75 pf c92(1)u820jzsd(2)a(3) 82 pf 9.0 c93(1)u101jzsd(2)a(3) 100 pf 10.0 y5p c90(1)u101kzyd(2)a(3) 100 pf 10% 7.0 5.0 0.55 0.1 7.5 mm or 10 mm c90(1)u151kzyd(2)a(3) 150 pf c90(1)u221kzyd(2)a(3) 220 pf c90(1)u331kzyd(2)a(3) 330 pf c90(1)u471kzyd(2)a(3) 470 pf c91(1)u561kzyd(2)a(3) 560 pf 8.0 c91(1)u681kzyd(2)a(3) 680 pf c92(1)u821kzyd(2)a(3) 820 pf 9.0 c92(1)u102kzyd(2)a(3) 1,000 pf y5u c90(1)u102mzwd(2)a(3) 1,000 pf 20% 7.0 5.0 0.55 0.1 7.5 mm or 10 mm 7.5 mm or 10 mm c92(1)u152mzwd(2)a(3) 1,500 pf 9.0 c92(1)u222mzwd(2)a(3) 2,200 pf c94(1)u332mzwd(2)a(3) 3,300 pf 11.0 c96(1)u392mzwd(2)a(3) 3,900 pf 13.0 10 mm only c96(1)u472mzwd(2)a(3) 4,700 pf y5v c90(1)u102mzvd(2)a(3) 1,000 pf 20% 7.0 5.0 0.55 0.1 7.5 mm or 10 mm 7.5 mm or 10 mm c90(1)u152mzvd(2)a(3) 1,500 pf c90(1)u222mzvd(2)a(3) 2,200 pf c92(1)u332mzvd(2)a(3) 3,300 pf 9.0 c94(1)u392mzvd(2)a(3) 3,900 pf 11.0 c94(1)u472mzvd(2)a(3) 4,700 pf c96(1)u682mzvd(2)a(3) 6,800 pf 13.0 10 mm only c98(1)u103mzvd(2)a(3) 10,000 pf 15.0 kemet part number capacitance capacitance tolerance body diameter (maximum) body thickness (maximum) lead diameter lead spacing radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 6 table 2 C performance & reliability: test methods and conditions item specifcation test method operating temperature range ?40oc to +125oc dielectric strength between lead wires 2sjempyvw 8getegmxsvwepprsxfeqekr%vqwmw ettpmfxrxpemvwjsvwgsrw s-rwypexmsr 2sjempyvw 8xvqmrepwpewsjxgetegmxsv weppfgsrrgxxskxv%qxepjsmp mwxmkxpvettevsyrxfssjx getegmxsvexemwxergsjefsyxxsqq jvsqegxvqmrep8getegmxsvmwxr mrwvxmrxsegsrxemrvppmxqxep feppwettvsmqexpqqmrmeqxv %vqwmwettpmjsvwgsrwfxr xgetegmxsvpemvwerqxepfeppw metal foil metal balls about 3 to 4 mm insulation resistance (ir) 10,000 m minimum the insulation resistance shall be measured with 50050 vdc applied after 605 seconds of charging. capacitance within specifed tolerance y5p, y5u and y5v: capacitance is measured at 1 khz 20% and 5 vrms or less. (202c) sl: capacitance is measured at 1 mhz 20% and 1.00.2 vrms (25c) dissipation factor (df) or q temperature characteristics specifcation y5p, y5u df 2.5% y5v df 5.0% sl 30 pf: q 1000 < 30 pf: q 400 +(20 x c) c = nominal capacitance temperature characteristics temperature characteristics capacitance change y5p within 10% y5u within +20%/?55% y5v within ~+30%/?80% sl ?1,000 ~+350 ppmoc (+20oc ~+85oc) a capacitance measurement is made at each step specifed: step temperature 1 +202oc 2 ?252oc 3 +202oc 4 +852oc 5 +202oc pre-treatment: capacitor is stored at 852oc for 1 hour and then placed at room condition 1 for 242 hours before measurement. terminal strength tensile lead wire or capacitor body shall not break. with the termination in its normal position, the specimen is held by its body in such a manner that the axis of the termination is vertical; a tensile force of 10 n is applied to the termination in the direction of its axis and acting in a direction away from the body of the specimen. bending lead wire or capacitor body shall not break. with the termination in its normal position, the specimen is held by its body in such a manner that the axis of the termination is vertical; a mass force of 5 n is then suspended from the end of the termination. the body of the specimen is then inclined within a period of 2 to 3 seconds, through an angle of approximately 90 in the vertical plane and then resumed to its initial position over the same period of time; this operation constitutes one bend. one bend immediately followed by a second bend in the opposite direction. 1 room condition is defned as follows: temperature: 15 ~ 35c/humidity: 45 ~ 75%/atmospheric pressure: 86 ~ 106 kpa. radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 7 table 2 C performance & reliability: test methods and conditions cont'd item specifcation test method solderability lead wire should have a uniform coating of solder in the axial direction and over 3/4 of its circumference. the lead wire of the capacitor is dipped into molten solder for 50.5 seconds. the depth of immersion is up to 1.5 mm (+5/?0 mm) from the root of lead wires. solder temperature: lead free solder (sn-3ag C 0.5cu) 245c 5c. soldering effect (non-preheat) appearance no visual defect as shown in the fgure below, the lead wires are immersed in molten solder up to 1.5 mm (+5/?0 mm) from the end of the epoxy meniscus (root of lead wire). duration/solder temperature: 3.50.5 seconds/350c 10c or 101 seconds/260c 5c molten solder 1.5 to 2.0 mm capacitor thermal screen pre-treatment: capacitor is stored at 85c 2c for 1 hour and then placed at room condition 1 for 24 2 hours before initial measurements. post-treatment: capacitor is stored for 1 to 2 hours at room condition 1 . ir 1,000 m dielectric strength y5p, y5u and y5v: within 10% sl: within 2.5% or 0.25 pf, whichever is larger. soldering effect (preheat) appearance 2szmwyepjgx etegmxsvmwwxsvexjsvwgsrw 8rewwsrmrxkyvfpsxpemvwevmqqvw mrqspxrwspvytxsqqqqjvsqxrsjx tsqrmwgywvssxsjpemv duration/solder temperature: 7.5 +0/?1 seconds/260c 5c molten solder 1.5 to 2.0 mm capacitor thermal screen pre-treatment: capacitor is stored at 85c 2c for 1 hour and then placed at room condition 1 for 24 2 hours before initial measurements. post-treatment: capacitor is stored for 1 to 2 hours at room condition 1 . ir 1,000 m dielectric strength y5p, y5u and y5v: within 10% sl: within 2.5% or 0.25 pf, whichever is larger. biased humidity appearance no visual defect steady state humidity: load humidity: capacitance temperature characteristics capacitance change y5p within 10% y5u within 20% y5v within 30% sl within 2.5% or 0.25 pf, whichever is larger. 90 to 95% humidity at 40c 2c for 500 12 hours. post treatment: capacitor is stored for 1 to 2 hours at room condition 1 . 90 to 95% humidity at 40c 2c for 500 12 hours with full rated voltage applied. post treatment: capacitor is stored for 1 to 2 hours at room condition 1 . df y5p and y5u: 5.0% maximum y5v: 7.5% maximum q sl: less than 30 pf: q 100 + 10 c/3 more than 30 pf: q 200 c = nominal capacitance -6 =4=er=91 qmrmqyq sl: 1,000 m minimum dielectric strength no failures 1 room condition is defned as follows: temperature: 15 ~ 35c/humidity: 45 ~ 75%/atmospheric pressure: 86 ~ 106 kpa. radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 8 table 2 C performance & reliability: test methods and conditions cont'd item specifcation test method high temperature life appearance no visual defect impulse voltage: each individual capacitor is subjected to three 5 kv impulses prior to life testing. capacitors are placed in a circulating air oven for a period of 1,000 hours. the air in the oven is maintained at a temperature of 125c 2 throughout the test. the capacitors are subjected to ac 510 vrms. each hour the voltage is increased to 1,000 vrms for 0.1 seconds. capacitance change y5p, y5v and y5u: within 20% 70mxmrrsvrt whichever is larger. ir 3,000 m minimum sl: 1,000 m minimum dielectric strength no failures flame test the capacitor fame extinguishes as follows: cycle time 1 ~ 4 30 seconds maximum 5 60 seconds maximum the capacitor is exposed to a fame for 15 seconds and then removed for 15 seconds. this test is repeated for 5 cycles. 76 capacitor flame 38 127 20o gas burner (unit:mm) active flammability the cheesecloth should not ignite. the capacitors are individually wrapped in at least one, but not more than two, complete layers of cheesecloth. they are then subjected to 20 discharges. the interval between successive discharges is 5 seconds. the vac is maintained for 2 minutes after the last discharge. s 1 tr vac s 2 c 1 l 3 l 4 c 2 c 3 c x c t vt l 1 f r oscilloscope l 2 c 1, 2 1 f 10% c 3 0.033 f 5% 10 kv l 1-4 1r%6sgsvgso cx test capacitor r 1002% v ac vr 5% ct 3 f 5% 10 kv v r rated voltage f fuse, rated 10a vt voltage applied to ct vx 5kv time 1 room condition is defned as follows: temperature: 15 ~ 35c/humidity: 45 ~ 75%/atmospheric pressure: 86 ~ 106 kpa. radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade) tr td time td (us) 46 47 tr (us) 1.2 1.5 cx (uf) pp 0.01 0.1 u pr u vp 0.9vp 0.5vp voltage
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 9 table 2 C performance & reliability: test methods and conditions cont'd item specifcation test method passive flammability the burning time should not exceed 30 seconds. the tissue paper should not ignite. the capacitor under test is held into a fame and in a position which best promotes burning. each specimen is exposed to the fame one time. 200 5mm about 8mm 45o test specimen about 10mm thick board tissue time of exposure to fame: length of fame: gas burner length: inside diameter: outside diameter: gas butane gas purity: 30 seconds 121 mm 35 mm minimum 0.50.1 mm 0.9 mm maximum 95% minimum temperature cycle appearance no visual defect the capacitor is subjected to 5 temperature cycles. temperature cycle step temperature (c) dwell time (minutes) transition time (minutes) 1 ?40+0/?3 30 3 2 room temperature 3 3 125+3/?0 30 4 room temperature 3 pre-treatment: capacitor shall be stored at 852 for 1 hour then placed at room condition 1 for 242 hours. post-treatment : capacitor is stored for 1 to 2 hours at room condition 1 . capacitance temperature characteristics capacitance change sl within 5% y5p within 10% y5u, y5v within 20% df/q sl 30 pf: q 350 < 30 pf: q 275 +5/2c c = nominal capacitance y5p df 5% y5u, y5v df 7.5% ir 3,000 m m inimum dielectric strength no failures 1 room condition is defned as follows: temperature: 15 ~ 35c/humidity: 45 ~ 75%/atmospheric pressure: 86 ~ 106 kpa. radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 10 soldering and mounting information soldering: when soldering this product to a pcb/pwb, do not exceed the solder heat resistance specifcation of the capacitor. subjecting this product to excessive heating could refow the solder joint between the lead and ceramic element and/or may result in thermal shocks that can crack the ceramic element. when soldering these capacitors with a soldering iron, it should be performed under the following conditions: ? t emperature of iron-tip: 400oc maximum ? s oldering iron wattage: 50 w maximum ? s oldering time: 3.5 seconds maximum cleaning (ultrasonic cleaning): to perform ultrasonic cleaning, observe the following conditions: ? r inse bath capacity: output of 20 watts per liter or less ? r insing time: 5 minute maximum ? d o not vibrate the pcb/pwb directly ? e xcessive ultrasonic cleaning may lead to fatigue destruction of the lead wires construction detailed cross section epoxy encapsulation (0.4 mm minimum thickness, pigment = blue/ul 94 v-0) lead attach solder (sn96.5/ag3/cu0.5) electrode (ag ? glass frit) core metal barrier layer finish layer steel cu 100% sn (3-7 m) lead wire dielectric material (batio 3 ) lead attach solder (sn96.5/ag3/cu0. electrode (ag ? glass frit) dielectric material (batio 3 ) radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 11 marking these capacitors shall be stamped or laser marked with kemet's trademark, type designation, capacitor class, rated voltage, rated capacitance and capacitance tolerance codes. in addition, all devices are marked with the recognized approval mark and a date/lot code for traceability. marking will be supplied either on one side or both sides of the encapsulated capacitor body. all marking shall be legible to allow for clear identifcation of the component. marking appears in legible contrast. illustrated below is an example of the marking format and content. (two sided marking is limited to capacitors with body diameters 8.0 mm.) single sided ul approval mark vde & enec approval marks iec 60384-14 3rd (2005) rated capacitance (3 numeric characters) capacitance tolerance code (1 character) capacitor class and rated voltage kemet id type designation (2 characters) date/lot code (see table below) double sided capacitor class and rated voltage front back kemet id type designation (2 characters) vde & enec approval marks iec 60384-14 3rd (2005) ul approval mark date/lot code (see table below) rated capacitance (3 numeric characters) capacitance tolerance code (1 character) date/lot code explanation 6 c 6 1234 last digit of year, e.g., 6 = 2016 manufacturing location code manufacturing month: 1-9 = jan - sept a = october n = november d = december last 4 digits of lot no. radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 12 packaging quantities capacitor body diameter (mm) body diameter code 1 bulk bag (loose) ammo pack (carrier tape) component pitch on carrier tape 2 12.7 mm 15 mm 25.4 mm 7.0 0 500 pieces/bag 1,000 pieces/box 1,000 pieces/box 8.0 1 9.0 2 10.0 3 11.0 4 12.0 5 13.0 6 500 pieces/box 14.0 7 15.0 8 1 the "body diameter code" is located in the third character position of the ordering code. this code identifes the maximum diameter of the capacitor body in millimeters. for more information regarding the ordering code, see "ordering information" section of this document. 2 for details regarding component pitch on carrier tape, see "ammo pack taping format" and "ammo pack taping specifcations" sections of this document. radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 13 figure 1 - ammo pack taping format 5 mm and 7.5 mm lead spacing: l p 1 p 2 p f e d p 0 w 0 w 2 h 0 w 1 w ?d 0 ?d ?s ? 10 mm lead spacing: l p 1 p 2 p f e d p 0 w 0 w 2 h 0 w 1 w ?d 0 ?d ?s ? table 3 C ammo pack taping specifcations 1 4viviviikviiviiiiikv3vivkv sections of this ivvivi 2 viivviiiki lead spacing 5 mm 7.5 mm 10 mm lead style straight preformed 1 straight preformed 1 straight preformed 1 -xiq 7qfsp (mqirwmsrwqq 0ieh7tegmrk f 7.51.0 10.01.0 sqtsrrx4mxg p 12.7 15.0 25.42 7tvsgox,sp4mxg p 0 12.70.3 15.00.3 12.70.3 7tvsgox,sprxvxs component center p 2 6.351.5 7.51.5 12.71.5 7tvsgox,sprxvxs0e center p 1 3.751.0 3.751.0 7.71.5 smeqxv 74vsygx3vvmrkswer6exmrkwwgxmsrsjxmwsgyqrx sqtsrrx%pmkrqrxwmwm 7 02.0 evvmv8etmx w 0 t maximum marking side ?h 1 ?h 2 t 2 t 1 radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 14 table 3 C ammo pack taping specifcations cont'd 1 prefromed (crimped) lead confgurations include vertical kink, outside kink and inside kink. see "lead confgurations" and "ordering information" sections of this document for further details. 2 also referred to as "lead length" in this document. application notes: storage and operating conditions: the insulating coating of these devices does not form an air and moisture-tight seal. avoid exposure to moisture and do not use or store these devices in a corrosive atmosphere, especially where chloride gas, sulfde gas, acid, alkali, salt, or the like are present. before cleaning, bonding or molding these devices, it is important to verify that your process does not affect product quality and performance. kemet recommends testing and evaluating the performance of a cleaned, bonded or molded product prior to implementing and/or qualifying any of these processes. store the capacitors where the temperature and relative humidity do not exceed 40 degrees centigrade and 70% respectively. for optimum solderability, capacitor stock should be used promptly, preferably within 6 months of receipt. working voltage: application voltage (vp-p or vo-p) must not exceed the voltage rating of the capacitor. irregular voltages can be generated for a transient period of time when voltage is initially applied and/or removed from a circuit. it is important to choose a capacitor with a voltage rating greater than or equal to these irregular voltages. lead spacing 5 mm 7.5 mm 10 mm lead style straight preformed 1 straight preformed 1 straight preformed 1 item symbol dimensions (mm) sprocket hole position w 1 9.00.5 height to seating plane 2 (preformed leads 1 ) h 0 n/a 18.0+2.0/?0 n/a 18.0+2.0/?0 n/a 18.0+2.0/?0 height to seating plane 2 (straight leads) h 20.0+1.5/?1.0 n/a 20.0+1.5/?1.0 n/a 20.0+1.5/?1.0 n/a lead protrusion ? 2.0 maximum diameter of sprocket hole d 0 4.00.2 lead diameter d 0.550.1 carrier tape thickness t 1 0.60.3 total thickness (carrier tape, hold-down tape and lead) t 2 1.5 maximum component alignment (front/ back ) ?h 1 2.0 maximum ?h 2 cut out length l 11.0 maximum hold-down tape width w 0 11.0 minimum 11.5 minimum hold-down tape position w 2 3.0 maximum 1.51.5 radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 15 operating temperature and self-generating heat: the surface temperature of a capacitor should be kept below the upper limit of its rated operating temperature range. be sure to take into account the heat generated by the capacitor itself. when the capacitor is used in a high-frequency current, pulse current or similar current, it may self-generate heat due to dielectric loss. temperature rise due to self-generated heating should not exceed 20c (while operated at an atmosphere temperature of 25c). handling - vibration and impact: do not expose these devices or their leads to excessive shock or vibration during use. failure to follow the above cautions may result, worst case, in a short circuit and cause fuming or partial dispersion when the product is used. radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c 1065_x1_440 vac_y2_300 vac ? 1/13/2017 16 kemet electronic corporation sales off ces for a complete list of our global sales off ces, please visit www.kemet.com/sales. disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. kemet is a registered trademark of kemet electronics corporation. radial leaded ceramic disc capacitors safety standard recognized, 900 series, encapsulated, ac type, x1 440 vac/y2 300 vac (industrial grade)

▲Up To Search▲

Price & Availability of C917U472JZVDDA7317

	To Download C917U472JZVDDA7317 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .